Torque vs Speed: Why Robots Are Strong but Slow
A motor has a fixed power budget. Gears can trade speed for turning force, so strong joints are slow and fast joints are weak.
Ratio 4:1 → output about 750 rpm with roughly 4× the turning force of the bare motor (real gearboxes lose a little to friction).
Power is roughly torque times speed. A motor can give lots of speed with little torque or the other way round, but not both.
A gearbox lets a designer choose where to sit on that trade. A robot that must lift a heavy load picks high torque, which means slower motion.
You can choose the right gearing for the job: slow and strong for lifting, quick and light for fast pick and place.
A joint with the wrong gearing either cannot lift the load or moves far too slowly.
Gearboxes add weight, friction and backlash, and a motor still overheats if asked for too much torque too long.
What happens when gears raise the torque?
Go deeper in the Atlas
Motors and Mechanics
- Gears Explained
- Servo Motor Explained
- How a Robot Arm Picks Up a Cup (6 Motors, Explained Simply)
- Why Are Robots So Good at Repeating?
- Harmonic Drive
- Micro Robots
- Stewart Platform
- Snake Robots
- Inverse Kinematics
- Degrees of Freedom
- Torque vs Speed
- PWM Explained
- Stepper Motor Explained
- Why Robot Motors Get Hot Even When Holding Still
- Delta Robot Explained
- SCARA Robot Arm