Snake Robots: How They Slither Through Tight Spaces
Many small joints in a row bend in a wave, so the robot can crawl, climb and squeeze through gaps wheels cannot.
The robot repeats this loop many times a second. Tap a step to pause on it.
A snake robot is a chain of joints. If each joint bends a little after the one before, a wave runs down the body and pushes the robot forward, like a real snake.
The body can bend around corners, climb pipes, and fit through gaps no bigger than its own width.
It can inspect pipes, search rubble after an earthquake, or work inside machines where wheels and legs get stuck.
A wheeled robot stops at the first gap or step, and a legged one needs room for its legs.
With so many joints, control is complex, and the body is slow and not good at carrying loads.
What makes a snake robot move forward?
Go deeper in the Atlas
Motors and Mechanics
- Gears Explained
- Servo Motor Explained
- How a Robot Arm Picks Up a Cup (6 Motors, Explained Simply)
- Why Are Robots So Good at Repeating?
- Harmonic Drive
- Micro Robots
- Stewart Platform
- Snake Robots
- Inverse Kinematics
- Degrees of Freedom
- Torque vs Speed
- PWM Explained
- Stepper Motor Explained
- Why Robot Motors Get Hot Even When Holding Still
- Delta Robot Explained
- SCARA Robot Arm