Gears Explained: How a Tiny Motor Gets Strong
Gears trade speed for turning force. A small fast motor plus a gear reduction becomes a slow, strong joint.
Ratio 4:1 → output about 750 rpm with roughly 4× the turning force of the bare motor (real gearboxes lose a little to friction).
A small motor spins fast but with little turning force (torque). A gear reduction connects a small gear on the motor to a bigger gear on the output.
With a 10 to 1 reduction, the output turns about ten times slower and, ignoring losses, with about ten times the torque. Real gearboxes lose some of it as friction.
A palm-sized motor can lift a robot arm, drive a wheel up a slope or hold a joint steady.
The motor alone spins quickly but stalls under load, so the arm would not lift its own weight.
More reduction means slower motion, and gears add backlash (a little play) and friction.
A motor spins at 3000 rpm through a 10:1 reduction. About how fast is the output?
Go deeper in the Atlas
Motors and Mechanics
- Gears Explained
- Servo Motor Explained
- How a Robot Arm Picks Up a Cup (6 Motors, Explained Simply)
- Why Are Robots So Good at Repeating?
- Harmonic Drive
- Micro Robots
- Stewart Platform
- Snake Robots
- Inverse Kinematics
- Degrees of Freedom
- Torque vs Speed
- PWM Explained
- Stepper Motor Explained
- Why Robot Motors Get Hot Even When Holding Still
- Delta Robot Explained
- SCARA Robot Arm