Inverse Kinematics: The Maths Behind Every Robot Arm
You know where the hand should be. Inverse kinematics works out what angle each joint needs to get it there.
The robot repeats this loop many times a second. Tap a step to pause on it.
Forward kinematics goes from joint angles to hand position. Inverse kinematics goes the other way, which is what you need when you say go to this point.
There may be several answers, one answer or none. The controller picks a solution that reaches the target without hitting anything.
You can say move the gripper here and the arm works out every joint, so the robot can pick things from anywhere in reach.
You would have to teach every pose joint by joint, and the robot could not adapt when the object moves.
Near awkward poses the maths gets unstable, and some points are simply out of reach.
What does inverse kinematics solve?
Go deeper in the Atlas
Motors and Mechanics
- Gears Explained
- Servo Motor Explained
- How a Robot Arm Picks Up a Cup (6 Motors, Explained Simply)
- Why Are Robots So Good at Repeating?
- Harmonic Drive
- Micro Robots
- Stewart Platform
- Snake Robots
- Inverse Kinematics
- Degrees of Freedom
- Torque vs Speed
- PWM Explained
- Stepper Motor Explained
- Why Robot Motors Get Hot Even When Holding Still
- Delta Robot Explained
- SCARA Robot Arm