SCARA Robot Arm: Why It Is So Fast at Pick and Place
A SCARA arm is stiff up and down but flexible side to side, which is exactly what packing and assembly need.
Ratio 4:1 → output about 750 rpm with roughly 4× the turning force of the bare motor (real gearboxes lose a little to friction).
SCARA arms have joints that turn around vertical axes, so the arm swings in a flat plane like a human arm on a table, plus a straight up-and-down motion at the end.
The design is rigid against vertical load and compliant sideways. That suits pressing parts into place, inserting pins and quick pick-and-place on a flat surface.
Fast, repeatable movement in a plane at a moderate price, ideal for circuit boards and small assemblies.
A general six-axis arm can do the job, but it is usually more expensive and slower at simple flat tasks.
It works well on a flat work surface and is limited in reaching around or tilting an object. It is not as flexible as a six-axis arm.
What kind of task is a SCARA arm best at?
Go deeper in the Atlas
Motors and Mechanics
- Gears Explained
- Servo Motor Explained
- How a Robot Arm Picks Up a Cup (6 Motors, Explained Simply)
- Why Are Robots So Good at Repeating?
- Harmonic Drive
- Micro Robots
- Stewart Platform
- Snake Robots
- Inverse Kinematics
- Degrees of Freedom
- Torque vs Speed
- PWM Explained
- Stepper Motor Explained
- Why Robot Motors Get Hot Even When Holding Still
- Delta Robot Explained
- SCARA Robot Arm