Stewart Platform: Six Legs for Precise Motion
A top plate on six adjustable legs can tilt, shift and rotate in every direction. Flight simulators and precision stages use it.
Ratio 4:1 → output about 750 rpm with roughly 4× the turning force of the bare motor (real gearboxes lose a little to friction).
A Stewart platform, also called a hexapod, holds a plate on six legs whose lengths can change. Because the legs work together, the plate has six degrees of freedom: three positions and three rotations.
Changing the six lengths in the right combination moves the plate to any pose in its range. Working out those lengths from the pose you want is a form of inverse kinematics.
You get a very stiff and precise platform that can carry a heavy load, such as a cockpit or a telescope mirror.
A stack of separate sliding and turning stages would be softer, heavier and less accurate.
The range is small compared with the size of the machine, and the maths and the leg joints are demanding.
How many legs does a classic Stewart platform use?
Go deeper in the Atlas
Motors and Mechanics
- Gears Explained
- Servo Motor Explained
- How a Robot Arm Picks Up a Cup (6 Motors, Explained Simply)
- Why Are Robots So Good at Repeating?
- Harmonic Drive
- Micro Robots
- Stewart Platform
- Snake Robots
- Inverse Kinematics
- Degrees of Freedom
- Torque vs Speed
- PWM Explained
- Stepper Motor Explained
- Why Robot Motors Get Hot Even When Holding Still
- Delta Robot Explained
- SCARA Robot Arm