Why Robot Motors Get Hot Even When Holding Still
Holding still still needs current, and current becomes heat. Brakes let a joint hold without burning power.
Ratio 4:1 → output about 750 rpm with roughly 4× the turning force of the bare motor (real gearboxes lose a little to friction).
To hold a weight against gravity, a motor has to keep producing torque, and torque needs current. The wires in the motor have resistance, so that current turns into heat even though nothing is moving.
Engineers reduce it with gear reduction (less torque needed at the motor), better cooling, and brakes that lock the joint when it should stay put so the motor can switch off.
Knowing this, you size motors with heat in mind and add brakes so an arm can hold a pose for hours without overheating.
A motor that works fine moving can overheat and shut down, or burn out, just holding a load.
Brakes add weight and cost, and can fail. Gears help but add friction and backlash.
Why does a motor heat up while holding a load still?
Go deeper in the Atlas
Motors and Mechanics
- Gears Explained
- Servo Motor Explained
- How a Robot Arm Picks Up a Cup (6 Motors, Explained Simply)
- Why Are Robots So Good at Repeating?
- Harmonic Drive
- Micro Robots
- Stewart Platform
- Snake Robots
- Inverse Kinematics
- Degrees of Freedom
- Torque vs Speed
- PWM Explained
- Stepper Motor Explained
- Why Robot Motors Get Hot Even When Holding Still
- Delta Robot Explained
- SCARA Robot Arm