How a Robot Arm Picks Up a Cup (6 Motors, Explained Simply)
Six joints let a gripper reach any point and turn to any angle. Software works out how much each joint must move.
The robot repeats this loop many times a second. Tap a step to pause on it.
To place a gripper anywhere in 3D space you need three numbers for position. To also point it the right way you need three more for orientation. That is why many arms have six joints.
The controller solves the reverse problem, called inverse kinematics: given where the hand should be, what angle should each joint take?
The arm can reach around a cup and grip it from the side or from above, the way a person would.
With fewer joints the hand can reach a point but not always at the right angle, so some objects cannot be grasped.
Some arm poses are singular, meaning the arm loses a direction of motion, and planning has to avoid them.
Why do many arms have six joints?
Go deeper in the Atlas
Motors and Mechanics
- Gears Explained
- Servo Motor Explained
- How a Robot Arm Picks Up a Cup (6 Motors, Explained Simply)
- Why Are Robots So Good at Repeating?
- Harmonic Drive
- Micro Robots
- Stewart Platform
- Snake Robots
- Inverse Kinematics
- Degrees of Freedom
- Torque vs Speed
- PWM Explained
- Stepper Motor Explained
- Why Robot Motors Get Hot Even When Holding Still
- Delta Robot Explained
- SCARA Robot Arm