Harmonic Drive: Why Robot Joints Use This Gear
A harmonic drive is a compact gear set with a big speed reduction and almost no backlash, which is ideal for precise robot joints.
Ratio 4:1 → output about 750 rpm with roughly 4× the turning force of the bare motor (real gearboxes lose a little to friction).
Inside a harmonic drive a flexible metal cup is squeezed into a slightly oval shape by a spinning part. Its teeth mesh with an outer ring that has a few more teeth, so each turn moves the output only a tiny step.
That gives reduction ratios such as 100 to 1 in a very small, light package, with very little play between the teeth.
A joint can hold a precise angle, carry a load and stay small enough to fit in a robot wrist.
You would need a bigger, heavier gearbox, and the slack in ordinary gears would make the arm wobble or miss its target.
Harmonic drives cost more than plain gears, and the flexible part can wear out under shock loads.
Why are harmonic drives popular in robot arm joints?
Go deeper in the Atlas
Motors and Mechanics
- Gears Explained
- Servo Motor Explained
- How a Robot Arm Picks Up a Cup (6 Motors, Explained Simply)
- Why Are Robots So Good at Repeating?
- Harmonic Drive
- Micro Robots
- Stewart Platform
- Snake Robots
- Inverse Kinematics
- Degrees of Freedom
- Torque vs Speed
- PWM Explained
- Stepper Motor Explained
- Why Robot Motors Get Hot Even When Holding Still
- Delta Robot Explained
- SCARA Robot Arm