Micro Robots: How Robots Smaller Than a Coin Move
At tiny sizes gears and motors stop working well, so micro robots move with vibration, magnetic fields or bending materials.
The robot repeats this loop many times a second. Tap a step to pause on it.
When a robot shrinks, friction and stickiness matter more than weight. Tiny gears jam and small motors lose power.
So micro robots use other tricks: vibrating legs that creep forward, magnets pulled by an outside field, or materials that bend when heated or charged.
Tiny robots could one day move inside pipes, machines or even the body, places no normal robot can reach.
A scaled-down copy of a normal robot would seize up, with no motion at all.
Power and control are the big problems: a micro robot cannot carry much battery, so many are driven from outside.
Why do tiny robots avoid normal gears?
Go deeper in the Atlas
Motors and Mechanics
- Gears Explained
- Servo Motor Explained
- How a Robot Arm Picks Up a Cup (6 Motors, Explained Simply)
- Why Are Robots So Good at Repeating?
- Harmonic Drive
- Micro Robots
- Stewart Platform
- Snake Robots
- Inverse Kinematics
- Degrees of Freedom
- Torque vs Speed
- PWM Explained
- Stepper Motor Explained
- Why Robot Motors Get Hot Even When Holding Still
- Delta Robot Explained
- SCARA Robot Arm