Feedback Control Explained: How Cruise Control Works
Measure, compare with the goal, correct, repeat. Cruise control and robots use the same loop.
The controller keeps measuring the angle and pulls the arm back to the green target.
Cruise control measures your speed, compares it with the speed you set, and changes the throttle by the difference. Going uphill slows the car, so the error grows and the throttle opens more.
This is closed-loop control. A PID controller is the most common version, mixing the present error, its history and how fast it is changing.
A system holds a target despite hills, wind, load or wear, because it keeps correcting.
Open-loop control just sets a fixed output and hopes. Any hill, bump or battery drop and it misses the target.
A correction that is too aggressive makes the system oscillate. Too gentle and it is slow.
What does closed-loop control use that open-loop does not?
Go deeper in the Atlas
Control and Balance
- Feedback Control Explained
- Line Follower Robot
- Why You Don't Fall in a Moving Bus (And Robots Do)
- How Boston Dynamics Robots Keep Their Balance
- How Drones Stay Level in Strong Wind
- PID Controller in 60 Seconds
- ROS 2
- How Robots Learn to Walk
- A* Pathfinding
- State Machine
- Robot Latency
- Reward Hacking
- Sim to Real
- How Humanoid Robots Walk Without Falling (ZMP Explained)
- Gain and Damping
- How Self-Driving Cars Think
- Swarm Robotics
- Robot Dog (Quadruped) Explained
- How a Drone Hovers
- Behavior Tree