How Boston Dynamics Robots Keep Their Balance
Legged robots sense their body tilt and joint positions many times per second and keep shifting weight and placing feet to stay up.
TRY IT: NUDGE THE ROBOT
The IMU reports tilt and spin rate, and the controller pushes back instantly.
Robots such as Spot and Atlas combine an IMU, joint sensors and sometimes cameras. A controller predicts where the body is heading and decides where each foot should land.
Walking is controlled falling. The robot keeps catching itself with each step.
With it you can
A legged robot can walk on rough ground, recover from a slip and go where wheels cannot.
Without it
It would fall at the first uneven step or push.
Where it goes wrong
Slippery or unseen ground, and very large pushes, can still topple them.
QUICK CHECK
Walking is best described as...
Go deeper in the Atlas
Control and Balance
- Feedback Control Explained
- Line Follower Robot
- Why You Don't Fall in a Moving Bus (And Robots Do)
- How Boston Dynamics Robots Keep Their Balance
- How Drones Stay Level in Strong Wind
- PID Controller in 60 Seconds
- ROS 2
- How Robots Learn to Walk
- A* Pathfinding
- State Machine
- Robot Latency
- Reward Hacking
- Sim to Real
- How Humanoid Robots Walk Without Falling (ZMP Explained)
- Gain and Damping
- How Self-Driving Cars Think
- Swarm Robotics
- Robot Dog (Quadruped) Explained
- How a Drone Hovers
- Behavior Tree