Line Follower Robot: How It Follows a Line
Two light sensors see dark line or bright floor. If the line drifts to one side, the robot steers toward it.
The robot repeats this loop many times a second. Tap a step to pause on it.
Infrared sensors under the robot report dark or light. If the left sensor sees the line, the robot turns left. If the right sees it, it turns right. If both see floor, it keeps straight.
Better versions use several sensors and measure how far off the line they are, then steer in proportion. That is feedback control again.
A cheap robot can follow a route in a factory floor or a school contest with no camera at all.
Driving straight and hoping would lose the line at the first bend.
Shiny floors, sharp corners and high speed can cause it to lose the line.
The left sensor sees the line. What should the robot do?
Go deeper in the Atlas
Control and Balance
- Feedback Control Explained
- Line Follower Robot
- Why You Don't Fall in a Moving Bus (And Robots Do)
- How Boston Dynamics Robots Keep Their Balance
- How Drones Stay Level in Strong Wind
- PID Controller in 60 Seconds
- ROS 2
- How Robots Learn to Walk
- A* Pathfinding
- State Machine
- Robot Latency
- Reward Hacking
- Sim to Real
- How Humanoid Robots Walk Without Falling (ZMP Explained)
- Gain and Damping
- How Self-Driving Cars Think
- Swarm Robotics
- Robot Dog (Quadruped) Explained
- How a Drone Hovers
- Behavior Tree