KUKA LBR iiwa
Most robot arms are blind to touch. This one notices a fingertip's worth of resistance and stops.
In one sentence
The LBR iiwa is a lightweight seven-axis industrial arm with joint torque sensing that lets it work in direct contact with people and parts, feeling its way into fits that rigid robots would jam.
The wow factor
Three things that make KUKA LBR iiwa genuinely impressive.
KUKA calls it the world's first series-produced sensitive lightweight robot, with torque sensors in all seven axes.
Because it feels force, it can press a peg into a hole by searching for the fit the way a human hand does.
It mounts on the floor, wall or ceiling and can be carried by two people, unlike most industrial arms.
How it works
A step-by-step breakdown, in plain English.
- 1A torque sensor in each of the seven joints measures how hard the arm is pushing or being pushed.
- 2The controller compares expected torque with measured torque; any difference means contact with something.
- 3In impedance-control mode the arm behaves like a spring, giving way under force so it can slide parts into place.
- 4The seventh axis adds redundancy, so the elbow can swing out of the way while the hand stays still.
- 5If a collision exceeds a set threshold, the arm stops within a fraction of a second.
Where you've probably seen it
The LBR iiwa is the arm in countless lab videos and in KUKA's "robot vs table tennis champion" marketing; it is also a common base for medical and research robots because of its sensitivity.
The team behind it
KUKA of Augsburg, Germany, one of the big four industrial robot makers, building on years of lightweight-robot research with the German Aerospace Center (DLR). LBR stands for Leichtbauroboter, German for lightweight robot, and iiwa for intelligent industrial work assistant.
The full story
The KUKA LBR iiwa is a seven-axis lightweight robot arm first launched in 2013 and described by KUKA as the world's first series-produced sensitive lightweight robot. LBR stands for Leichtbauroboter, German for lightweight robot, and iiwa for intelligent industrial work assistant. It comes in two sizes: the LBR iiwa 7 R800 with a 7 kg payload and 800 mm reach, and the LBR iiwa 14 R820 with 14 kg and 820 mm. Both have joint torque sensors in all seven axes, repeatability of ±0.1 mm, IP54 protection and can be mounted on the floor, wall or ceiling, with cleanroom variants available. The torque sensing is the point: the arm can detect contact, yield like a spring, and perform compliant assembly tasks such as fitting parts together by feel, while stopping safely if it bumps a person. That has made it a favorite not only on production lines but in research labs and medical systems. Trade press puts single-unit prices around US$68,000.
What do you think?
Cast your one-and-only vote. Be the first to vote.
Learn the science behind KUKA LBR iiwa
Three Atlas entries that explain how KUKA LBR iiwa actually works.
Mind-blowing facts
The seventh axis lets the elbow move while the hand stays put, like a human arm.
KUKA says the iiwa was the first sensitive lightweight robot made in series production.
The name is half German, half English: Leichtbauroboter plus intelligent industrial work assistant.
Plain English. Free. Unsubscribe in one click.
Sources
Every number on this page comes from one of these. If a spec is missing, no source stated it.
- KUKA — LBR iiwa product page and specificationswww.kuka.com
- Standard Bots — KUKA iiwa overview (launch year, repeatability, pricing)standardbots.com
Facts checked
Robots like this
Universal Robots UR5
It works beside humans without a safety cage — and started the cobot revolution.
Baxter
A factory robot you could teach by hand, that looked at you with cartoon eyes, and sold for the price of a car.
YuMi
Two little padded arms, each with seven joints, assembling a watch movement next to a person who never had to look up.