Baxter
A factory robot you could teach by hand, that looked at you with cartoon eyes, and sold for the price of a car.
In one sentence
Baxter was a two-armed collaborative robot designed to work next to people on simple factory tasks, taught by physically guiding its arms rather than by writing code.
The wow factor
Three things that make Baxter genuinely impressive.
At US$22,000 it cost a fraction of a conventional industrial arm and was meant for small factories that had never automated.
Its series-elastic actuators made it safe to bump into, but their springiness also hurt precision and became a reason the company failed.
Rethink raised about US$150 million and still shut down in October 2018 after a sale fell through at the last minute.
How it works
A step-by-step breakdown, in plain English.
- 1A worker grabs a cuff on the arm, moves it to a pick point, and presses a button; Baxter records the position.
- 2Cameras in the wrists and head let it find the object and adjust if the part is not exactly where it was taught.
- 3Series-elastic actuators put a spring between motor and joint, so the arm senses contact and gives way instead of pushing.
- 4The screen face shows eyes that look where the arm is about to move, so people nearby know what it will do.
- 5The robot repeats the taught sequence, pausing if a person gets in the way.
Where you've probably seen it
Baxter's friendly screen face made it the poster robot for the "robots are coming to the factory" articles of 2012 to 2015, and its 2018 demise became a cautionary tale about hype in robotics.
The team behind it
Rethink Robotics was founded in 2008 as Heartland Robotics by Rodney Brooks, co-founder of iRobot, with Ann Whitaker. It raised US$149.5 million, launched the one-armed Sawyer in 2015, closed on 3 October 2018, and sold its intellectual property to Germany's HAHN Group.
The full story
Baxter was a collaborative robot from Rethink Robotics of Boston, introduced in 2012 at a price of US$22,000, which IEEE Spectrum called ridiculously low for an industrial robot at the time. It had two arms with seven joints each, an animated face on a screen, and a bright red body, and it was programd by demonstration: a worker guided the arms through a task and Baxter remembered it. The idea, from founder Rodney Brooks, was to bring automation to small manufacturers that could not afford integrators or engineers. Its joints used series-elastic actuators, springs between motor and link, which made contact with people safe but cost precision and speed. A more accurate one-armed robot, Sawyer, followed in 2015. Despite raising US$149.5 million and finding a loyal following among university research labs, sales fell short, distributors switched to rival Universal Robots, and a planned acquisition collapsed. Rethink shut down on 3 October 2018, and HAHN Group bought its intellectual property.
What do you think?
Cast your one-and-only vote. Be the first to vote.
Learn the science behind Baxter
Three Atlas entries that explain how Baxter actually works.
Mind-blowing facts
Rethink had US$62 million in funding before Baxter even shipped.
The one-armed Sawyer, launched in 2015, survived Baxter and is still sold by HAHN Robotics.
Baxter's eyes on the screen looked toward where the arm was about to move.
Plain English. Free. Unsubscribe in one click.
Sources
Every number on this page comes from one of these. If a spec is missing, no source stated it.
- IEEE Spectrum — Rethink Robotics, pioneer of collaborative robots, shuts down (4 Oct 2018)spectrum.ieee.org
- The Robot Report — Rethink Robotics shutdown (13 Nov 2018)www.therobotreport.com
Facts checked
Robots like this
Universal Robots UR5
It works beside humans without a safety cage — and started the cobot revolution.
YuMi
Two little padded arms, each with seven joints, assembling a watch movement next to a person who never had to look up.
KUKA LBR iiwa
Most robot arms are blind to touch. This one notices a fingertip's worth of resistance and stops.