Unimate
Every robot arm in every car factory on Earth descends from one that poured a beer on late-night TV.
In one sentence
Unimate was the first industrial robot: a hydraulic arm that pulled red-hot metal castings out of a die-casting machine at a GM plant so that people did not have to.
The wow factor
Three things that make Unimate genuinely impressive.
Its first job was lifting red-hot die castings and dropping them into cooling liquid, a job that regularly burned workers.
Programs were stored on a magnetic drum, and you taught it by physically moving the gripper through the motions and recording them.
It appeared on The Tonight Show with Johnny Carson, where it knocked a golf ball into a cup, poured a beer and conducted a band.
How it works
A step-by-step breakdown, in plain English.
- 1An operator moved the arm by hand through each position of the task while the controller recorded the joint positions.
- 2Those positions were stored as a program on a magnetic drum memory.
- 3In operation, the controller stepped through the stored positions, commanding each of the five joints in turn.
- 4Hydraulic actuators moved the heavy arm, giving it the force to lift castings and hold welding tools.
- 5Feedback from the joints told the controller when each move was complete, so the sequence could repeat for hours.
Where you've probably seen it
Unimate was inducted into the Robot Hall of Fame in 2003 and holds the Guinness World Record for the first industrial production robot; its Tonight Show appearance is one of the most replayed clips in robotics history.
The team behind it
Inventor George Devol filed the patent for a "Programmed Article Transfer" on 10 December 1954; it was granted in 1961. He met engineer Joseph Engelberger at a party in 1956, and the two founded Unimation, the first robot manufacturing company. Engelberger, a fan of Isaac Asimov, is often called the father of robotics.
The full story
Unimate was the first industrial robot. Its inventor, George Devol, filed the patent in 1954, and after meeting the engineer and entrepreneur Joseph Engelberger at a party in 1956 the two founded Unimation to build it. The first unit went to work in 1961 on a General Motors assembly line at the Inland Fisher Guide plant in Ewing Township, New Jersey, where it took red-hot die castings out of a machine and cooled them, then handled parts for welding onto car bodies. The arm weighed 4,000 lb, cost about US$25,000, had five degrees of freedom and was driven by hydraulics. Its instructions were stored on a magnetic drum and taught by moving the gripper by hand. GM quickly installed 450 die-casting robots, and in 1969 Kawasaki licensed the design, seeding Japan's robot industry. Unimate was inducted into the Robot Hall of Fame in 2003. Every modern six-axis factory arm traces its lineage to this machine.
What do you think?
Cast your one-and-only vote. Be the first to vote.
Learn the science behind Unimate
Three Atlas entries that explain how Unimate actually works.
Mind-blowing facts
Devol's patent was filed in 1954 but not granted until 1961, the same year the robot started work.
Engelberger said "Sounds like a robot to me" when Devol described the idea, and the company name Unimation came from "universal automation".
The Smithsonian notes GM quickly installed 450 die-casting Unimates on its plant floors.
Plain English. Free. Unsubscribe in one click.
Sources
Every number on this page comes from one of these. If a spec is missing, no source stated it.
- Wikipedia — Unimateen.wikipedia.org
- Smithsonian Magazine — The story of the first industrial robotwww.smithsonianmag.com
Facts checked