Franka Research 3 (Panda)
Open a robot-learning paper from the last five years and there is a good chance this white arm is in Figure 1.
In one sentence
Franka Research 3, successor to the Panda, is a 7-axis torque-controlled arm with sensors in every joint and a 1 kHz open interface that lets researchers command it directly from their own code.
The wow factor
Three things that make Franka Research 3 (Panda) genuinely impressive.
It pre-ordered at €9,900 in 2016, when comparable sensitive arms cost many times more.
Its torque sensors notice a guiding force of about 2.5 N, so you can steer it with a fingertip.
The Franka Control Interface streams joint commands at 1,000 times a second, which is why learning labs love it.
How it works
A step-by-step breakdown, in plain English.
- 1Link-side torque sensors on all seven axes measure the load at each joint.
- 2The controller runs a 1 kHz loop comparing commanded and measured torques to detect contact and follow trajectories smoothly.
- 3Adjustable stiffness, from 10 to 3,000 N/m, lets the arm act rigid for precision or soft for safe contact.
- 4Researchers connect over Ethernet through the Franka Control Interface and send torque, velocity or position commands from their own software.
- 5A two-finger gripper, cameras and learning code sit on top; the arm itself weighs about 18.3 kg.
Where you've probably seen it
The white Panda arm is the standard platform of the imitation-learning and reinforcement-learning boom, appearing in demos from Google, Stanford, Berkeley and dozens of other labs; IEEE Robotics and Automation Magazine surveyed its role in 2024.
The team behind it
Franka Emika (now Franka Robotics) was founded in Munich by Sami Haddadin, a researcher mentored by Gerd Hirzinger of the German Aerospace Center (DLR), with KUKA among early investors. The team won Germany's Deutscher Zukunftspreis in 2017.
The full story
Franka Research 3 is the current version of the arm that Franka Emika of Munich announced in late 2016 and shipped in 2017 as Panda. Founder Sami Haddadin, mentored by DLR's Gerd Hirzinger, set out to make a sensitive, torque-controlled arm cheap enough for every lab, opening pre-orders at €9,900 (about US$10,500). The arm has seven axes, a 3 kg rated payload, 855 mm reach, repeatability within ±0.1 mm and weighs about 18.3 kg, with a 7 kg control unit. Link-side torque sensors on every joint give it a guiding sensitivity of about 2.5 N and let users dial stiffness from 10 to 3,000 N/m. Its defining feature is the Franka Control Interface, a 1 kHz Ethernet link that lets external code command the arm directly, alongside ROS support, Modbus/TCP and OPC UA. That openness made the Panda the de facto hardware of modern robot-learning research. In early production the robot built about 80 percent of itself.
What do you think?
Cast your one-and-only vote. Be the first to vote.
Family tree
The predecessors and successors of Franka Research 3 (Panda).
- Panda(2017)
- Franka Research 3(2022)
Learn the science behind Franka Research 3 (Panda)
Three Atlas entries that explain how Franka Research 3 (Panda) actually works.
Mind-blowing facts
Joints 1 to 4 can apply ±87 N·m; the wrist joints ±12 N·m.
Franka arms assembled about 80 percent of the early production units themselves.
The control unit draws only about 80 W, less than many desktop computers.
Plain English. Free. Unsubscribe in one click.
Sources
Every number on this page comes from one of these. If a spec is missing, no source stated it.
- Franka Robotics — Franka Research 3 datasheet (PDF)franka.de
- IEEE Spectrum — Franka: a robot arm that's safe, low cost, and can replicate itself (29 Dec 2016)spectrum.ieee.org
Facts checked
Robots like this
Universal Robots UR5
It works beside humans without a safety cage — and started the cobot revolution.
Baxter
A factory robot you could teach by hand, that looked at you with cartoon eyes, and sold for the price of a car.
YuMi
Two little padded arms, each with seven joints, assembling a watch movement next to a person who never had to look up.