Welding Robots: How Seam Tracking Follows the Joint
Parts never sit in exactly the same spot, so a welding robot senses the seam as it goes and corrects its path.
The controller keeps measuring the angle and pulls the arm back to the green target.
A welding robot that only replays a fixed path will miss the joint if the parts are a few millimetres out. Seam tracking adds a sensor, often a laser line or a camera, that finds the seam just ahead of the torch.
The robot compares where the seam is with where it expected it, and shifts the torch to follow. That is feedback control applied to a weld.
Welds stay in the right place even when parts vary, so fewer parts are scrapped and less fixture precision is needed.
A blind robot welds beside the joint and the part fails. You need very exact clamps for every part.
Bright arcs, smoke and shiny metal can fool the sensor, so it must be shielded and filtered.
What does seam tracking add to a welding robot?
Go deeper in the Atlas
Robots at Work
- How a Robot Vacuum Finds Its Charging Dock
- Why Robot Vacuums Always Miss the Corner
- How Warehouse Robots Avoid Crashing Into Each Other
- Why Robots Still Struggle to Climb Stairs
- Robot Lawn Mowers
- Robot Arms in Space
- Welding Robots
- Wheels vs Legs
- How Mars Rovers Drive With a 20-Minute Delay
- Why Sidewalk Delivery Robots Struggle With Kerbs
- Why Industrial Robots Are Kept Behind Safety Cages
- Why Robots Run Out of Battery So Quickly
- What Is a Cobot? The Robot Built to Work Beside You
- AGV vs AMR
- Underwater ROV
- Robot Exoskeleton
- How a Delivery Robot Crosses the Road Safely