MIT Mini Cheetah
A dog-sized robot built from off-the-shelf motors did a standing backflip, and suddenly everyone could build one.
In one sentence
Mini Cheetah is a small, tough four-legged robot from MIT whose low-cost modular motors let it run, get kicked, right itself and backflip, and whose design became a template for research quadrupeds.
The wow factor
Three things that make MIT Mini Cheetah genuinely impressive.
MIT says it was the first four-legged robot to perform a backflip, from a standing start on flat ground.
It trots untethered at 2.45 m/s and stays upright when kicked by a person.
Each leg uses three identical low-cost electric motors that can be swapped in minutes.
How it works
A step-by-step breakdown, in plain English.
- 1An IMU and joint encoders estimate the body's orientation and each leg's position hundreds of times a second.
- 2A model-predictive controller computes the ground forces each foot should apply to keep the body balanced.
- 3Twelve proprioceptive actuators, three per leg, turn those forces into motion; their low gear ratio lets them sense contact through motor current.
- 4For a backflip, a pre-planned trajectory launches the body and the legs tuck mid-air before landing.
- 5If it is knocked over, a righting routine folds the legs and rolls the body back onto its feet.
Where you've probably seen it
The March 2019 backflip video went viral, followed by clips of a soccer-playing pack of Mini Cheetahs on the MIT campus; the open design inspired many of today's low-cost quadrupeds.
The team behind it
Built in the Biomimetic Robotics Laboratory at MIT under professor Sangbae Kim, with graduate students Benjamin Katz and Jared Di Carlo leading the design and control work. The design was presented at ICRA 2019.
The full story
Mini Cheetah is a compact research quadruped developed in MIT's Biomimetic Robotics Laboratory and revealed in March 2019. It weighs about 20 lb (9 kg), the frame of a large house cat or small dog, and trots untethered at up to 2.45 m/s using a model-predictive controller. Its headline trick was a standing backflip, which MIT said made it the first four-legged robot to do one. The design priority was robustness and low cost: each leg uses three identical electric motors built from off-the-shelf parts that can be swapped quickly, so students could crash it, kick it and fix it the same afternoon. The robot keeps its balance when shoved and rights itself when knocked over. Professor Sangbae Kim and students Benjamin Katz and Jared Di Carlo presented the platform at ICRA 2019 and planned to lend units to other labs. The actuator design and the open controller shaped a wave of inexpensive research quadrupeds in the years that followed.
What do you think?
Cast your one-and-only vote. Be the first to vote.
Family tree
The predecessors and successors of MIT Mini Cheetah.
- MIT Cheetah(2013)
- Cheetah 3(2018)
- Mini Cheetah(2019)
Learn the science behind MIT Mini Cheetah
Three Atlas entries that explain how MIT Mini Cheetah actually works.
Mind-blowing facts
The backflip was executed from a standing start on flat ground.
Its motors are low-cost and identical, so a broken leg can be rebuilt from spares.
At 9 kg it weighs about the same as a small bag of cement.
Plain English. Free. Unsubscribe in one click.
Sources
Every number on this page comes from one of these. If a spec is missing, no source stated it.
- Tech Xplore — Limber Mini Cheetah robot delivers impressive backflip performance (Mar 2019)techxplore.com
- New Atlas — MIT's backflipping Mini Cheetah (4 Mar 2019)newatlas.com
Facts checked