ANYmal
There are rooms on an oil platform where a phone could spark a fire. This robot is allowed in.
In one sentence
ANYmal is a four-legged inspection robot that walks autonomous rounds through industrial plants, reading gauges, listening for faults and sniffing for gas, and the X model is explosion-proof.
The wow factor
Three things that make ANYmal genuinely impressive.
ANYmal X carries ATEX and IECEx certification for Zone 1, meaning it can work where flammable gas may be present.
It climbs stairs as steep as 45 degrees with 23 cm risers, including open grated steps.
It is rated IP67, so it keeps working in dust storms and heavy rain.
How it works
A step-by-step breakdown, in plain English.
- 1A 16-channel LiDAR sweeping 300,000 points a second at 360 degrees builds a map while the robot walks.
- 2Depth cameras pick safe footholds; the controller chooses foot placements in real time so each step lands on solid ground.
- 3A pan-tilt inspection head with a 20x zoom camera, a thermal camera and a microphone reads gauges, spots hot spots and hears abnormal sounds.
- 4Optional gas sensors (such as Honeywell SensePoint) sample the air at each checkpoint.
- 5After a mission of up to about 1.5 km, it returns to its dock, where a full charge takes three hours.
Where you've probably seen it
ANYmal is the robot in most "robot inspects offshore platform" news footage from Europe, and it starred in the viral ETH Zurich clips of a quadruped recovering after being shoved.
The team behind it
ANYbotics was founded in Zurich in 2016 as a spin-off of ETH Zurich's legged-robotics research by Péter Fankhauser and Hanspeter Fässler. The company employs around 150 people, raised a US$50 million Series B in May 2023 and won the IEEE Robotics and Automation Award for Product Innovation in 2022.
The full story
ANYmal is an autonomous legged inspection robot from ANYbotics, a 2016 spin-off of ETH Zurich in Switzerland. Its job is to walk routine inspection rounds in places that are tedious or dangerous for people: chemical plants, mines, offshore platforms and power stations. The explosion-proof ANYmal X version weighs 60.1 kg including its inspection and gas-sensor payloads, walks at up to 1.0 m/s, and runs 60 to 120 minutes on a swappable 932 Wh battery, covering about 2.5 km per charge. It is rated IP67, operates from 0 to 40 °C, and is ATEX and IECEx certified for Zone 1 hazardous areas. Its pan-tilt head carries a 20x optical zoom camera, a radiometric thermal camera reading from -10 to 400 °C, and a microphone, with optional gas sensors. ANYmal can climb stairs up to 45 degrees and squeeze through gaps 60 cm wide. Research versions are used at ETH Zurich, the University of Oxford and many other labs.
What do you think?
Cast your one-and-only vote. Be the first to vote.
Family tree
The predecessors and successors of ANYmal.
- StarlETH (ETH Zurich)(2012)
- ANYmal(2016)
- ANYmal X (Ex-proof)(2022)
Learn the science behind ANYmal
Three Atlas entries that explain how ANYmal actually works.
Mind-blowing facts
A full ANYmal X charge takes three hours; a 70 percent quick charge takes 100 minutes.
Its LiDAR sees from 0.4 m out to 100 m with about 3 cm accuracy.
The robot can fit through a 60 cm gap, about the width of a narrow doorway.
Plain English. Free. Unsubscribe in one click.
Sources
Every number on this page comes from one of these. If a spec is missing, no source stated it.
- ANYbotics — ANYmal X technical specifications (PDF)www.anybotics.com
- Wikipedia — ANYboticsen.wikipedia.org
Facts checked