End Effectors: Why the Gripper Is the Hardest Part
The end effector is the tool at the arm’s tip. It must grip many shapes, gently and firmly, which is harder than moving the arm.
The controller keeps measuring the angle and pulls the arm back to the green target.
The end effector can be a gripper, suction cup, welder or screwdriver. It is where the robot actually touches the world.
A gripper must handle objects of different size, weight and slipperiness. Too much force crushes, too little drops. Most factories use a different tool for each job.
Choosing the right end effector for the part, such as suction for flat boxes, makes a simple arm do a useful job.
A great arm with the wrong gripper cannot pick anything reliably.
A general-purpose hand that can handle everything is still an open research problem.
What is an end effector?
Go deeper in the Atlas
Hands and Touch
- How a Robot Hand Holds an Egg Without Crushing It
- Why Robotic and Prosthetic Hands Are So Hard to Build
- Why Surgical Robots Never Shake
- Tendon-Driven Robot Hands
- Prosthetic Hands
- Why Robots Still Can't Fold Your Laundry
- End Effectors
- Slip Detection
- Soft Robotic Grippers
- Robot Surgery Explained
- Robot Hand Degrees of Freedom