Course 3 of 5 · Beginner to intermediate · Free
Robot Arms: Build Ari
Build a small robot arm, then teach it to pick up a cup.
Build a small robot arm: servos, joints, smooth motion, a gentle gripper, calibration and a pick and place job.
- 🎬 10 video lessons · about 45 minutes
- ✅ A quick quiz after every lesson
- 📝 A final activity you write yourself
- 🎓 A certificate you can verify and share
- 🎙️ With Dot, Bo, Pip, Ari
What you will be able to do
After this course you can plan and build a small robot arm and make it pick up and place an object.
- Plan a robot arm from a job description
- Explain how a servo holds an angle
- Count joints and degrees of freedom
- Make arm motion smooth, and build a gentle gripper
- Calibrate the arm and run a pick and place job
- Who it is for
- Learners who want to build a small robot arm and make it pick up things.
- Before you start
- Course 2 recommended.
Lessons
- 1The arm box and the planPlan a robot arm: what it must do, and which parts it needs. · 4 min
- 2Inside a servoExplain what a servo is and how it holds an angle. · 4 min
- 3Joints and degrees of freedomCount how many ways an arm can move. · 4 min
- 4Smooth motionMake the arm move gently instead of snapping to a position. · 4 min
- 5The gripperDesign a gripper that holds a cup without crushing it. · 4 min
- 6Reach and geometryUse two links and angles to reach a point. · 4 min
- 7CalibrationFix small errors so the arm goes where it should. · 4 min
- 8Pick and placeBreak a job into steps using a simple state machine. · 4 min
- 9Mounting Ari on PipJoin two robots and keep them stable. · 4 min
- 10The first job togetherCombine driving and picking into one job. · 4 min
Final activity
Drive, pick and drop
Describe the drive, pick and drop job you built: list the steps in order, say what can go wrong at each step and how your robot handles it.
Sign in to write and save your answer.